ALLU CRUSHER SERIES

CRUSH MATERIALS DIRECTLY ON-SITE.

The ALLU Crusher is a series of crushing attachments designed for excavators from 10-33 tons. The series includes 4 different models, designed to crush a variety of materials directly on-site.

BETTER FOR YOU
BETTER FOR THE ENVIRONMENT

Maximum productivity

  • Increase your excavator utilization rate
  • Easy to handle, even in tight and limited areas
  • No need for logistics or permissions
  • Quick to put into operation
  • Easy to change fragment size

Robust, practical design

  • Can be run in reverse to reduce vaulting and jamming
  • High torque motors enable start up with a full load
  • Opens like a clam for safe and easy replacement of upper jaw

Environmentally friendly

  • Less material sent to landfills meaning less expenditure
  • Reduce pollution through decreased transportation and fuel costs

Crusher Features

1. Mainframe

2. Upper jaw – safe and easy to replace

3. Crushing plates – allow material to flow freely through jaws

4. Streamline wear-resistant frame – no external parts for a long-lasting operational life

5. Angled side and tip plates – provide a rigid frame, reduce the wear and provide a higher crushing filling rate

6. Pin adjustable – for quick fragment size changes

7. Protected belt drive – maintenance-free no adjustment

Technical specifications

AC 8-15
Excavator (t / US ton) 8-11 / 9-12
Weight (kg / lbs) 1400 / 3090
Operating Pressure (bar / ksi) 250 / 3600
Max. Operation Flow (LPM / gpm) 80 / 21
Loading Capacity (m3 / yd3) 0.35 / 0.46
Crushing Cam Opening (mm / in) 260 / 10
Output Size Regulation (mm / in) 0-16 to 0-200 (0-5/8 to 0-8)
Excavator (t / US ton) 10-14 / 11 – 15
Weight (kg / lbs) 1740 / 3840
Operating Pressure (bar / ksi) 250 / 3600
Max Operation Flow (LPM / gpm) 95 / 25
Loading Capacity (m3 / yd3) 0.35 / 0.46
Crushing Cam Opening (mm / in) 370 / 14.6
Output Size Regulation (mm / in) 0-16 to 0-200 (0-5/8 to 0-8)
Excavator (t / US ton) 15-22 / 17-24
Weight (kg / lbs) 2465 / 5440
Operating Pressure (bar / ksi) 250 / 2600
Max. Operation Flow (LPM / gpm) 160 / 42
Loading Capacity (m3 / yd3) 0.5 / 0.65
Crushing Cam Opening (mm / in) 370 / 14.6
Output Size Regulation (mm / in) 0-16 to 0-200 (0-5/8 to 0-8)
Excavator (t / US ton) 23-35 / 25 – 39
Weight (kg / lbs) 3820 / 8420
Operating Pressure (bar / ksi)2 250 / 3600
Max. Operation Flow ( LPM / gpm) 180 / 47
Loading Capacity (m3 / yd3) 1.0 / 1.31
Crushing Cam Opening (mm / in) 370 / 14.6
Output Size Regulation (mm / in) 0-16 to 0-200 (0-5/8 to 0-8)

Main Application Areas

  • Demolition
  • Excavation
  • Construction
  • Utility and Road works
  • Concrete Waste Recycling
  • Asphalt Recycling
  • Waste Rock Handling at quarries
  • Concrete Pipe Industry
  • Brick and Ceramics Industry

CRUSHERS CASE STUDIES

ALLU Transformer Screener Crusher Processing Construction Waste

Speak to
a specialist

Our Customer Service team will happy to answer your queries or arrange a demo as soon as possible

Call +358 3 882 140

Find your local dealer

    RELATED PRODUCT

    PARTNER YOUR CRUSHER WITH ALLU TRANSFORMER

    The ALLU Crusher and ALLU Transformer support each other. Both functions are often needed at the same job site and are complimentary. By pre-screening the material with the ALLU Transformer the capacity of the ALLU Crusher will increase because the fine material has been screened away. If the material is wet, fine material often tends to clog. This causes jamming and bridging. Furthermore, the quality of the desired end product will significantly improve. Re-use of pre-screened material; can be utilized as fill material.

    • One base machine and operator needed
    • Low investment costs
    • Full mobile solutions to any job site
    • Process the fine materials first with the ALLU Transformer and hard materials with the ALLU Crusher. Increase the overall capacity
    • Less landfill payments – lower dumping costs