ALLU Processor series reaches, mixes and processes

4.4.2018

The ALLU Processor is a power mixer attachment which converts any excavator into a powerful and versatile mixing tool capable of penetrating and effectively mixing a variety of difficult materials. Materials suited for the attachment range from clay, silt, peat, sludge and sediment, to dredged material and contaminated soil.

Introducing the ALLU Processor 300 HD

Working to a depth of 3m, and with a weight of 2,095kg (+400 kg fabricated mount plate), the Processor 300 HD is designed to be durable. It’s made from wear resistant steel, with a stem that’s engineered to be strong, streamlined and lightweight. Fitted to, and powered by the excavator’s hydraulic system, and benefitting from its ability to reach difficult or soft areas, the Processor 300 HD is able to mix materials everywhere the excavator goes. This means that binders or chemical agents can be delivered to the area of the highest mixing shear by an attached 80mm diameter pipe, and injected via a nozzle located between the mixing drums.

The Processor is equipped with automatic torque adjustment valves located between the two hydraulic motors, with drum rpm and temperature sensors, as well as sensors for oil leakage detection inside the frame construction. The excavator operator is thus able to control the rotational direction of the drums to adjust for most effective mixing. 2m and 3m extension tubes are also available as options for added working depth. These features make it the ideal tool for civil engineering, demolition, site remediation and coastal facility ground stabilization projects.

More power to the operator - 500HD

As with its smaller sibling the 300 HD, the Processor 500 HD is both durable and strong. It differs from the smaller 300 HD by being even bigger and by being able to work to a depth of 5m with a weight of 2,445 kg (+400 kg fabricated mount plate). Despite its strength, the wear resistant steel stem is both nimble and streamlined, and is again powered by the excavator’s hydraulic system. It is able to reach difficult or soft areas, meaning that the Processor 500 HD can mix materials everywhere the excavator goes, with binders or chemical agents being delivered to the area of the highest mixing shear by an attached 80mm diameter pipe. The Processor is equipped with automatic torque adjustment valves located between the two hydraulic motors, with drum rpm and temperature sensors, as well as sensors for oil leakage detection, located inside the frame construction. The excavator operator controls the rotational direction of the drums to adjust for most effective mixing. 2m and 3m extension tubes are also available as options for added working depth. In effect both ALLU Processors provide a variety of uses, as they essentially reach, mix and process whether the material is wet or dry. This has made them ideal in constructing temporary roads, solidification and soil remediation projects, dealing with contaminated soil, excavation and pipeline works, as well as oil ponds and sand acid tar.

Contact us

For further information, please leave your details below